Skip to main content

NS2 projects with Source Code


Before shedding huge money for projects,  please go through the links which has source code along with how to execute the project.
The following projects are either taken from another website or from a open source hub and all the works are compatible with ns-2.35. It is a individual work done by me (T S Pradeep Kumar). For some projects, i lost the source code or its misplaced, but all these posts have detailed explanation that tells how to install these projects.  Also the source codes are provided from a google drive link.
(If any one have a source code and dont know to compile, please send it to me through my google+ link, I will compile for you and let you know the results).

This posts is suitable for PG students, Research scholars and Graduate students.


  1. Aqua Sim in NS2
  2. LEACH Protocol Installation
  3. Security Protocol as a packet (Agent/Security_packet)
  4. Adding a new agent and application in ns2
  5. AntNet (Ant colony Algorithm in ns2)
  6. SUMO and MOVE Example traffic Simulation (Do it yourself exercise, but a video is available)
  7. Routing Table printing in DSDV Protocol
  8. Routing table printing in AODV protocol
  9. Printing the Congestion window for TCP protocol
  10. TORA protocol in NS2
  11. Green Cloud Simulator in ns2
  12. Printing the Antenna threshold in propagation modes in ns2
  13. OLSR Protocol in NS2
  14. Mannasim - A Sensor network simulator in ns2
  15. AWK Scripts for performance calculation
  16. Energy Model in NS2
  17. Finding the node position, velocity and speed of the node while using AODV protocol
  18. Promiscuous mode in AODV 
These works takes more time and to support my effort, kindly donate me


T S Pradeep Kumar

Comments

Popular posts from this blog

AWK Scripts for NS2 to process data from Trace Files

AWK Scripts are very good in processing the data from the log (trace files) which we get from NS2. If you want to process the trace file manually, here is the detailHere is a sample of trace file from NS2 (However ns2 supports a new type of trace file also), but this post will make you understand the old trace format only.r 0.030085562 _0_ MAC  --- 0 message 32 [0 ffffffff 1 800] ------- [1:255 -1:255 32 0] r 0.030110562 _0_ RTR  --- 0 message 32 [0 ffffffff 1 800] ------- [1:255 -1:255 32 0] s 1.119926192 _0_ RTR  --- 1 message 32 [0 0 0 0] ------- [0:255 -1:255 32 0]
AWK Scripts are very good in processing the data column wise. For example
the first column in the above trace file represents r, s which indicates receive, sent respectively. If we want to trace the entire r and s alone from this trace file we can represent it as $1
So
$1 represents ACTION
$2 Time
$3 Node ID
$4 Layer
$5 Flags
$6 seqno
$7 type
$8 Size
$14 Energy (if the network nodes includes EnergyModel)To run the awk script in Li…

nam installation - Segmentation Fault (Solved)

If you are encountering "Segmentation Fault" error while running nam in Ubuntu 14.04 or Linux Mint 17+ editions, this post will be helpful for you.

Download the nam file from this link

First, remove the nam which was installed earlier using the following command 

pradeep@localhost $] sudo apt-get remove nam

and install the new nam which was downloaded just now. go to the folder where the file was downloaded and issue the following command

pradeep@localhost $]  sudo dpkg --install nam_1.15-10_i386.deb

See the screenshot below to install and use nam

 T S Pradeep Kumar

Installation of ns2 in Ubuntu 18.04 - NS2 Tutorial # 2

ns2 installation in Ubuntu 18.04

Unlike earlier version of ubuntu, the 18,04 version does not support the direct installation of ns2, because of the latest C/C++ compiler (7.x), but the latest C/C++ compiler supported by ns2 is gcc-4.8. So this post and video tells you about the installation of gcc-4.8 version, then ns2 and then configuration.
Here are the steps, Please follow the video given below for more information.

$] tar zxvf ns-allinone-2.35.tar.gz


$] sudo apt install gcc-4.8 g++-4.8

if you have installed ubuntu just now, you can try these commands also in the beginning

$] sudo apt update
$] sudo apt install build-essential autoconf automake libxmu-dev

$] cd ns-allinone-2.35/ns-2.35
$] gedit Makefile.in
$] gedit linkstate/ls.h

line number 137, change erase to this->erase
$] cd ..
$] ./install

export PATH=$PATH:/home/pradeepkumar/ns-allinone-2.35/bin:/home/pradeepkumar/ns-allinone-2.35/tcl8.5.10/unix:/home/pradeepkumar/ns-allinone-2.35/tk8.5.10/unix
export LD_LIBRARY_PATH=$L…