Skip to main content

Complete NS2 Tutorial

Complete NS2 Tutorial
To benefit the various students and research scholars who are working in NS2 (Network Simulator 2), this NS2 Tutorial will help you in understanding the basics of NS2 and you can accomplish most of the your simulation using this software. 

Total Duration of the Videos: 11 Hours 
Total Lectures - 25 (More will be added to the following list)
To view the Lectures, Click here to go the Playlist in my Youtube Channel. 

NS2 Tutorial


Labels:

Comments

  1. tutorialcupSeptember 3, 2020 at 12:45 PM

    Your blog is awfully appealing. I am contented with your post. I regularly read your blog and its very helpful. If you are looking for the best Algorithm Interview Questions, then visit TutorialCup. Thanks! I enjoyed this blog post.

    ReplyDelete
  2. UnknownSeptember 5, 2020 at 8:35 PM

    Respected Sir,

    I am getting the following error. Can you sort it out.

    farooque@farooque-Vostro-3490:~/Desktop/ns-allinone-3.31/ns-3.31$ ./waf --run scratch/vanet-routing-compare
    Waf: Entering directory `/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build'
    Waf: Leaving directory `/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build'
    Build commands will be stored in build/compile_commands.json
    'build' finished successfully (1.152s)
    msg="Could not connect callback to /NodeList/*/DeviceList/*/ns3::WifiNetDevice/Phy/PhyTxDrop", file=../src/core/model/config.cc, line=920
    terminate called without an active exception
    Command ['/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build/scratch/vanet-routing-compare'] terminated with signal SIGIOT. Run it under a debugger to get more information (./waf --run --gdb").

    ReplyDelete
  3. UnknownSeptember 5, 2020 at 8:37 PM

    Happy Teacher's day sir

    ReplyDelete
  4. Identified😇September 14, 2020 at 8:59 AM

    sir can u please post ant based routing algorithm fro manets

    ReplyDelete
  5. mayaSeptember 22, 2020 at 7:15 AM

    sir i tried for TCP congestion control wired network after saving NSG file it gives segmentation fault error how to resolve it

    ReplyDelete
    Replies
    1. T S Pradeep KumarOctober 26, 2020 at 10:53 AM

      I think there is some error while creating the Application or Agent in the NSG. Either send me the file for correction or try again in NSG to resolve the error.

      Delete
    2. MayaNovember 30, 2020 at 12:29 PM

      thank u sir

      Delete
  6. AnonymousSeptember 29, 2020 at 5:17 PM

    Respected Sir,
    I am new to ns2. I am planning to work on WBAN energy efficient routing as a part of my PhD.
    Kindly guide me how to start.

    ReplyDelete
  7. AfrinOctober 26, 2020 at 10:52 PM

    can you please make a video 'implementing p2p overlay over manet in ns2 step by step.
    it's a request.

    ReplyDelete
  8. AfrinNovember 19, 2020 at 10:04 PM

    dear sir,
    please can u make a step by step tutorial about p2p protocol over manet.
    please sir.

    ReplyDelete
  9. UnknownDecember 17, 2020 at 10:33 AM

    Hopefully, you will be fine. I am already asked you about the trust based implementation in NS2 for WSN. Please Sir give me your valuable solutions.

    ReplyDelete
  10. AnonymousMay 26, 2022 at 8:41 PM

    good evening sir,
    Can you say how to write awk script to calculate round trip time?

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide]

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide] Are you planning to install or try Ubuntu 24.04 LTS ? The easiest and most reliable method is to create a bootable USB drive using Rufus on a Windows system. This detailed guide will help you create a Ubuntu 24.04 USB bootloader using Rufus with easy-to-follow steps and screenshots (optional). Here is the complete video of the bootloader creation and OS installation in Windows 11. 🧰 Requirements A USB flash drive (minimum 8GB recommended) A Windows PC Ubuntu 24.04 LTS ISO file Rufus USB creation tool 🧾 Steps to Create a Ubuntu 24.04 Bootable USB Using Rufus ✅ Step 1: Download Ubuntu 24.04 ISO Visit the official Ubuntu website and download the Ubuntu 24.04 LTS ISO file . ✅ Step 2: Download and Run Rufus Head to Rufus official site and download the latest version. Open the executable file (no installation required). ✅ Step 3: Insert USB Drive Plug in your USB drive. Rufus ...
Post a Comment
Read more

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libc...
3 comments
Read more

NS2 (NS-2.35) Installation in Ubuntu 11.10

This post will help you in installing Network Simulator 2 version NS2.35 in Ubuntu 11.10 Instructions Install Ubuntu Download NS-2.35 ( http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download ) Unzip or untar it to any folder (recommended is /home/ loginname) using the following commands one by one sudo apt-get update sudo apt-get install build-essential autoconf automake libxmu-dev tar zxvf ns-allinone-2.35.tar.gz cd ns-allinone-2.35 ./install Once installed the PATH information will be provided to you. Copy the PATH and LD_LIBRARY_PATH Variable to .bashrc (see a dot in the beginning) Input the path information in .bashrc file like this export PATH=$PATH:<Place your paths here> export LD_LIBRARY_PATH=$LD_LIBRARY_PATH: <place the LD_LIBRARY_PATHS> here. Once done, save the file and close execute the command source .bashrc try ns or nam to see whether your installation succeeded.
77 comments
Read more