Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

Complete NS2 Tutorial

Complete NS2 Tutorial
To benefit the various students and research scholars who are working in NS2 (Network Simulator 2), this NS2 Tutorial will help you in understanding the basics of NS2 and you can accomplish most of the your simulation using this software. 

Total Duration of the Videos: 11 Hours 
Total Lectures - 25 (More will be added to the following list)
To view the Lectures, Click here to go the Playlist in my Youtube Channel. 

NS2 Tutorial


Comments

  1. Your blog is awfully appealing. I am contented with your post. I regularly read your blog and its very helpful. If you are looking for the best Algorithm Interview Questions, then visit TutorialCup. Thanks! I enjoyed this blog post.

    ReplyDelete
  2. Respected Sir,

    I am getting the following error. Can you sort it out.

    farooque@farooque-Vostro-3490:~/Desktop/ns-allinone-3.31/ns-3.31$ ./waf --run scratch/vanet-routing-compare
    Waf: Entering directory `/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build'
    Waf: Leaving directory `/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build'
    Build commands will be stored in build/compile_commands.json
    'build' finished successfully (1.152s)
    msg="Could not connect callback to /NodeList/*/DeviceList/*/ns3::WifiNetDevice/Phy/PhyTxDrop", file=../src/core/model/config.cc, line=920
    terminate called without an active exception
    Command ['/home/farooque/Desktop/ns-allinone-3.31/ns-3.31/build/scratch/vanet-routing-compare'] terminated with signal SIGIOT. Run it under a debugger to get more information (./waf --run --gdb").

    ReplyDelete
  3. sir can u please post ant based routing algorithm fro manets

    ReplyDelete
  4. sir i tried for TCP congestion control wired network after saving NSG file it gives segmentation fault error how to resolve it

    ReplyDelete
    Replies
    1. I think there is some error while creating the Application or Agent in the NSG. Either send me the file for correction or try again in NSG to resolve the error.

      Delete
  5. Respected Sir,
    I am new to ns2. I am planning to work on WBAN energy efficient routing as a part of my PhD.
    Kindly guide me how to start.

    ReplyDelete
  6. can you please make a video 'implementing p2p overlay over manet in ns2 step by step.
    it's a request.

    ReplyDelete
  7. dear sir,
    please can u make a step by step tutorial about p2p protocol over manet.
    please sir.

    ReplyDelete
  8. Hopefully, you will be fine. I am already asked you about the trust based implementation in NS2 for WSN. Please Sir give me your valuable solutions.

    ReplyDelete
  9. good evening sir,
    Can you say how to write awk script to calculate round trip time?

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#