Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

Ant Colony algorithm using NS2

Ant Colony Algorithm in NS2 for Wired Networks.

Please follow the video for full instructions 



I am running in Ubuntu 20.04

Ant Colony


There are multiple files in Ant Colony (we use a protocol called Antnet) which i have already included in my blog called
https://www.nsnam.com 

Lets go to my Blog. And Search for Ant Colony and Download the complete folder AntNet as shown in the video.

Now Copy paste the files in their corresponding location:

My Location if ns2 is 
/home/pradeepkumar/ns-allinone-2.35/ns-2.35/
Inside this folder, the files have to be pasted in differnet sub folders... 
Let me show you one by one...

cmu-trace.cc and cmu-trace.h have to be pasted to ~trace/
drop-tail.cc and drop-tail.h ---- ~queue/
Makefile.in to be replaced in the ns-2.35/ folder.

ns-default.tcl, ns-lib.tcl and ns-packet.tcl to be pasted at 
~tcl/lib

packet.h to be replaced at common/ folder.



priqueue.cc and priqueue.h to be pasted at queue/

antnet/ folder have to be copied to ns-2.35/ folder (this is very important as this is the main algorithm.)

Step 2: 
Change the GCC and G++ compiler in the Makefile.in as this is very important, else you might get errors if you leave the default GCC.

Please refer my following video on how to install ns2.35 in ubuntu 20.04.

Open Makefile.in

Change the following lines as given below

CC = gcc-4.8
CPP = g++-4.8

Step 3: Now Compile it
Open a Terminal.
$] cd ns-allinone-2.35/ns-2.35/
$] ./configure
$] make clean
$] make 

This might take some time based on the speed of your computer.
Without errors, successfully installed.... 

Step 4: 
Now lets understand the algorithm and packet structure.

Step 5:
Running the TCL File.

$] ns simpleant.tcl

We got three files simple.tr and simple.nam and rtable.txt
https://www.nsnam.com/2014/11/app-tool-for-analysing-tracefiles-for.html?q=ant+colony

Use of APP Tool Master.

URLs
Ant Colony Algorithm
https://www.nsnam.com/2015/03/ant-colony-algorithm-antnet-in-ns-235.html

APP Tools to analyse trace files.
https://www.nsnam.com/2014/11/app-tool-for-analysing-tracefiles-for.html

To download the Ant colony algorithm
https://drive.google.com/drive/folders/0B4nUSbTYSK4TflVJRDVXQ1QzTUo0bUJWUlAyZkx4UFdzQzJhYkpvWXU5N0k4QlE5Yl9tOFE

Thanks for watching my video...




Comments

  1. how can i pass a measure the performance of video streaming over mmwave with ns3?

    ReplyDelete
  2. how can i pass a measure the performance of video streaming over mmwave with ns3?

    ReplyDelete
  3. Can you show the implementation in NS3

    ReplyDelete
  4. Dear Dr really u are a wonderful person,i appreciate your motivation to share your knowledge to us.once again 10q.
    i am working in WSN to minimize energy consumption and to maximize the lifetime of the network using clustering algorithm of GA.so could u help how to cluster a WSN and make a multi hop routing.

    ReplyDelete
  5. Sir, Can you please explain how to convert this code to run in Ns3.

    ReplyDelete
  6. Dear Sir,
    Can you please explain how to convert this code to run in Ns3.
    How to modifier AODV by integrating ACO to find the optimal path?
    Thanks.

    ReplyDelete
  7. Thanks very much Sir, please Sir can you show how to applied antNet to a WSN with NS2.
    Please Dr...

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#