Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

By
Post a Comment

Greedy Perimeter Stateless Routing (GPSR) protocol in ns3

Image
By

GPSR - Greedy Perimeter and Stateless Routing

Please watch the following video for Full details.


 VANETs - Vehicular Adhoc NEtworks.

PA GPSR, MM GPSR and GPSR.

Under and post graduate - You can use the modules as it is and compare these protcols for VANETs.

If you are a PhD scholar, you can modify the protocols and design your own GPSR alternatives.

In this video, we will be seeing the installation of GPSR and some source codes.

ns-3.27 which i could not succeed, So I prefer going to ns-3.23

we can both multiple version of ns3. I am going to run ns-3.23 for GPSR and other simulations with ns-3.27 and ns-3.29

Welcome to the Installation.

If you are installing ns3 for the first time, install the following packages.

(You can copy paste)

$] sudo apt install build-essential autoconf automake libxmu-dev  python-pygraphviz cvs mercurial bzr git cmake p7zip-full python-matplotlib python-tk python-dev python-kiwi python-gnome2 python-gnome2-dev qt4-dev-tools qt4-qmake qt4-qmake qt4-default gnuplot-x11 wireshark default-jdk


 We will download the ns3.23 package. Better that you may use the commands one by one as given below.

$] wget -c http://www.nsnam.org/release/ns-allinone-3.23.tar.bz2

$] tar xjvf ns-allinone-3.23.tar.bz2

$] cd ns-allinone-3.23/

The following are the commands to copy the PA GPSR folder to ns3 folders. I have shown how to copy in GUI.

$] cp -a PA-GPSR/src/. ns-3.23/src/

$] cp -a PA-GPSR/examples/. ns-3.23/scratch/

$] cp -a PA-GPSR/results/ ns-3.23/

$] cp -a PA-GPSR/figures/ ns-3.23/

$] cp -a PA-GPSR/scripts/ ns-3.23/

$] cp PA-GPSR/main.sh ns-3.23/

Installation of ns3.23 along with GPSR protocol. 

Open a Terminal

$] cd ns-allinone-3.23/ns-3.23

 $] CXXFLAGS="-Wall -std=c++0x" ./waf configure --enable-examples

 I got some error

 $] ./waf

 $] sudo ./waf install

Installation of GPSR and their alternatives is done.

To execute an example

We have already have a file in the scartch folder.

Just for installation of GPSR protocol.

Thanks for watchign my Channel

Please subscribe and share it to your friends.

https://www.nsnam.com





Subscribe to My Youtube Channel - Engineering Clinic
Labels:

Comments

  1. NS_DOCMarch 30, 2020 at 8:46 PM

    Dear,
    I flowed all the steps.
    In the folder PAgpsr , I found one subfolder called " .git " so I don't no if I have to copy also this subfolder in nS3 along with figures, results, scripts, main.sh. So, I copied this subfolder with the 4 subfolders. And, I run.
    CXXFLAGS, ./waf, sudo ./waf install

    But I get an error (see below).
    Please help me to solve the problem


    - install /usr/local/include/ns3.23/ns3/core-module.h (from build/ns3/core-module.h)
    + install /usr/local/include/ns3.23/ns3/csma-layout-module.h (from build/ns3/csma-layout-module.h)
    - install /usr/local/include/ns3.23/ns3/csma-module.h (from build/ns3/csma-module.h)
    ../scratch/pagpsr-main.cc: In constructor ‘GpsrExample::GpsrExample()’:
    ../scratch/pagpsr-main.cc:93:15: warning: ‘GpsrExample::algorithm’ will be initialized after [-Wreorder]
    93 | std::string algorithm;
    | ^~~~~~~~~
    ../scratch/pagpsr-main.cc:92:8: warning: ‘bool GpsrExample::newfile’ [-Wreorder]
    92 | bool newfile;
    | ^~~~~~~
    ../scratch/pagpsr-main.cc:127:1: warning: when initialized here [-Wreorder]
    127 | GpsrExample::GpsrExample () :
    | ^~~~~~~~~~~
    ../scratch/pagpsr-main.cc:98:12: warning: ‘GpsrExample::nPairs’ will be initialized after [-Wreorder]
    98 | uint32_t nPairs;
    | ^~~~~~
    ../scratch/pagpsr-main.cc:77:15: warning: ‘std::string GpsrExample::phyMode’ [-Wreorder]
    77 | std::string phyMode;
    | ^~~~~~~
    ../scratch/pagpsr-main.cc:127:1: warning: when initialized here [-Wreorder]
    127 | GpsrExample::GpsrExample () :
    | ^~~~~~~~~~~
    ../scratch/pagpsr-main.cc: In member function ‘void GpsrExample::Run()’:
    ../scratch/pagpsr-main.cc:320:33: warning: variable ‘t’ set but not used [-Wunused-but-set-variable]
    320 | Ipv4FlowClassifier::FiveTuple t=classifier->FindFlow(i->first);
    | ^
    ../scratch/pagpsr-main.cc: In member function ‘void GpsrExample::InstallInternetStack()’:
    ../scratch/pagpsr-main.cc:416:15: warning: unused variable ‘dst_c’ [-Wunused-variable]
    416 | char const *dst_c = dst_s.c_str();
    | ^~~~~
    ../scratch/pagpsr-main.cc:417:15: warning: unused variable ‘source_c’ [-Wunused-variable]
    417 | char const *source_c = source_s.c_str();
    | ^~~~~~~~
    Waf: Leaving directory `/home/doctoratas16/ns-allinone-3.23/ns-3.23/build'
    Build failed
    Traceback (most recent call last):
    File "/home/doctoratas16/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Runner.py", line 162, in start
    st=tsk.runnable_status()
    File "/home/doctoratas16/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Build.py", line 453, in runnable_status
    ret=super(inst,self).runnable_status()
    File "/home/doctoratas16/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Task.py", line 289, in runnable_status
    new_sig=self.signature()
    File "/home/doctoratas16/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Task.py", line 274, in signature
    self.sig_explicit_deps()
    File "/home/doctoratas16/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Task.py", line 327, in sig_explicit_deps
    raise Errors.WafError('Missing node signature for %r (required by %r)'%(x,self))
    WafError: Missing node signature for /home/doctoratas16/ns-allinone-3.23/ns-3.23/build/src/fd-net-device/ns3.23-tap-device-creator-debug (required by
    {task 140658800166352: inst ns3.23-tap-device-creator-debug -> })


    ReplyDelete
  2. UnknownMay 2, 2020 at 1:58 PM

    Many thanks sir for uploading this video. I am a big fan of your working.
    hats off to you sir.

    Pawan Singh
    Assistant Professor
    IGNTU Amarkantak

    ReplyDelete
  3. UnknownJuly 7, 2020 at 8:32 PM

    @NS_DOC did you rectified the issue if so do mention i too am troubled and need proper solution.

    ReplyDelete
  4. UnknownJune 7, 2021 at 1:20 PM

    Dear Sir
    I am getting the following error while executing this command on ubuntu 20.04 version
    please help me to solve this problem.

    user1@HP:~/ns-allinone-3.23/ns-3.23$ ./waf --run scratch/pagpsr-main
    Waf: Entering directory `/home/user1/ns-allinone-3.23/ns-3.23/build'
    Waf: Leaving directory `/home/user1/ns-allinone-3.23/ns-3.23/build'
    'build' finished successfully (14.308s)
    Traceback (most recent call last):
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 97, in waf_entry_point
    run_commands()
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 155, in run_commands
    run_command('shutdown')
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 146, in run_command
    ctx.execute()
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Context.py", line 84, in execute
    self.recurse([os.path.dirname(g_module.root_path)])
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Context.py", line 125, in recurse
    user_function(self)
    File "/home/user1/ns-allinone-3.23/ns-3.23/wscript", line 926, in shutdown
    out = open(build_status_file, 'w')
    IOError: [Errno 13] Permission denied: '/home/user1/ns-allinone-3.23/ns-3.23/build/build-status.py'
    .

    ReplyDelete
  5. UnknownJune 7, 2021 at 1:22 PM

    Dear Sir
    i am getting the following error, kindly help me to solve this.
    I am working on ubuntu 20.04.

    user1@HP:~/ns-allinone-3.23/ns-3.23$ ./waf --run scratch/pagpsr-main
    Waf: Entering directory `/home/user1/ns-allinone-3.23/ns-3.23/build'
    Waf: Leaving directory `/home/user1/ns-allinone-3.23/ns-3.23/build'
    'build' finished successfully (14.308s)
    Traceback (most recent call last):
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 97, in waf_entry_point
    run_commands()
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 155, in run_commands
    run_command('shutdown')
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Scripting.py", line 146, in run_command
    ctx.execute()
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Context.py", line 84, in execute
    self.recurse([os.path.dirname(g_module.root_path)])
    File "/home/user1/ns-allinone-3.23/ns-3.23/.waf-1.7.16-9ca17eb492c97b689870b4ff9db75880/waflib/Context.py", line 125, in recurse
    user_function(self)
    File "/home/user1/ns-allinone-3.23/ns-3.23/wscript", line 926, in shutdown
    out = open(build_status_file, 'w')
    IOError: [Errno 13] Permission denied: '/home/user1/ns-allinone-3.23/ns-3.23/build/build-status.py'

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

By
In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-
1 comment
Read more

Installation of NS2 (ns-2.35) in Ubuntu 20.04

By
Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi
19 comments
Read more

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

By
NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#
3 comments
Read more