Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

How to add a Protocol in ns2 - NS2 Tutorial #13

How to add a new protocol in ns2

I am going to use the version ns-2.35
protoname was one of the best unicast routing protocol for ns2.



Agent/SIMP

Protoname -> Simp

PROTONAME -> SIMP

protoname -> simp

you can download the  source code from https://www.nsnam.com



There are totally 5 files in the source code

protoname.cc converted to simp.cc 

protoname.h -> simp.h 

protoname_pkt.h -> simp_pkt.h 

protoname_rtable.cc -> simp_rtable.cc 

protoname_rtable.h -> simp_rtable.h

New Protocol Implementation

In this new protocol,  we have to

1. Add the source code (the 5 files given above)

2. existing code modification (within ns2)

3. Make an entry in the Makefile.in

4. Recompile ns2

5. Test the protocol using a TCL file.

Addition of source code is done.

Existing code modification - Very important.

in ns2, inforamtion about compilation is scattered... we need to make modifications at multiple locations. What are the files that are needed for modification.



all the file locations are here.

To add a packet data

~ns-allinone-2.35/ns-2.35/common/packet.h


to add OTCL Data

~ns-allinone-2.35/ns-2.35/tcl/lib/ns-packet.tcl

~ns-allinone-2.35/ns-2.35/tcl/lib/ns-default.tcl

~ns-allinone-2.35/ns-2.35/tcl/lib/ns-lib.tcl


To add Tracing data

~ns-allinone-2.35/ns-2.35/trace/cmu-trace.h

~ns-allinone-2.35/ns-2.35/trace/cmu-trace.cc



To maintain or add a queue

~ns-allinone-2.35/ns-2.35/queue/priqueue.cc


packet.h

We are going to add a packet called as PT_SIMP...

we are done with packet.h

OTCL Data

ns-default.tcl (1 modifications)

ns-packet.tcl (3 modifications)

ns-lib.tcl (2 modifications)

queuing is done in

priqueue.cc (1 modification)

Finally, trace

cmu-trace.cc and cmu-trace.h also done.

Now recompiling ns2.

Before that, copy the source code in to ns2's path.

we have to create a folder simp/ inside the ns-allinone-2.35/ns-2.35/

paste all the files in the above folder.

Make an entry in the Makefile.in, in the variable called as OBJ_CC=/

Make the entry only for the .cc files and not for the .h files.

We have 5 total files, but only two .cc files, so it is enough to make an entry for the two .cc files alone as given below



    simp/simp.o simp/simp_rtable.o \


An entry is made in Makefile.in


Now, compile it using the command

$] ./configure

$] make

To check whether the compilation is successful, check for the .o files according to the .cc files.

Here we have two .o files  called

simp.o

simp_rtable.o

Now testing the protocol with a tcl file. LEt us do that now...

The name of the tcl file is simp.tcl

$] ns simp.tcl

It is my home folder (/home/pradeepkumar/)

Success for getting the output.

Thanks for watching my youtube videos.

Subscribe to my channel and share it to the world.

To download the soruce codes, please follow https://www.nsnam.com

Stay tuned for more lectures..

Download the source code here. 

T S Pradeep Kumar

Comments

  1. Hello professor Pradeep Kumar.
    I watched this video and some others you have published and I can say your the best network and ns2 tutor as far as I know.
    unfortunately. I coudnt find the source codes of this tutorial. I dont if they are missing or I cant find them.
    I am in immediate need for them. It would be great if you leave a reply.
    thanks for your videos and for your efforts

    ReplyDelete
  2. Great Sir, Thanks
    for stepwise description for making the process simpler

    ReplyDelete
  3. sir, please upload a video on how to simulate cognitive radio network in ns2.

    ReplyDelete
  4. hello Sir,
    we have been trying this example but we have ns2.30 installed in our system so kindly provide us guidance how to run the same on ns2.30 version.

    Regards.

    ReplyDelete
  5. Where can we learn in details how to create our own agent?

    ReplyDelete
  6. Sir please upload fuzzy logic implementation in ns2.

    ReplyDelete
  7. how to add DSRC protocol in NS2.35
    i saw your youtube videos tutorial but getting an error while compiling ns sinleBroadcast.tcl
    .o files missing

    ReplyDelete
    Replies
    1. did you find any solution I get the same error

      Delete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#