Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

Finding Energy, node position and speed in AODV - NS2 Tutorial # 11.1

AODV - Part 2

Finding the node position, energy and speed of the node while it is forwarding a packet.

By default, these codes are not there in AODV, so we are going to modify or append in AODV protocol..


Steps
Step 1:

Open aodv.h and aodv.cc, these two files will be modified

Step 2:

Declare variables in aodv.h file in protected mode


double xpos,ypos,zpos,energy_t;

int n_speed;

MobileNode *t_node;

FILE *fp;


Step 3:

initialize these values inside the constrctor of aodv.cc file


xpos=ypos=zpos=0.0;

n_speed=0;

energy_t=0.0;

fp=fopen("runtime.dat","w");

Step 4:

add the following statements to the forward() function of aodv.cc

fprintf(fp,"Position is X, Y, Z, Node Speed,Energy\n");

t_node=(MobileNode*)(Node::get_node_by_address(index));

((MobileNode*) t_node)->getLoc(&xpos,&ypos,&zpos);

fprintf(fp,"%d %f %f %f",index,xpos,ypos,zpos);

t_node=(MobileNode*)(Node::get_node_by_address(index));

n_speed=((MobileNode*)t_node)->speed();

energy_t=t_node->energy_model()->energy();

fprintf(fp,"%d %d %f\n",index,n_speed,energy_t);


After the above step,

Step5:

recompile ns2 using the command

$] make

Step 6:

run a TCL File and check for the runtime.dat file in the same folder.

$] ns AODV.tcl

You will get a file called as runtime.dat in the same folder.

use the file for plotting any characteristics.

Thanks for watching.

Please share and subscribe to my Video channel.

More lectrures to come.

Youtube.com/tspradeepkumar

https://www.nsnam.com



T S Pradeep Kumar

Comments

  1. I followed as per your instructions .But I didn't get the values of nodes position and energy from in the same folder where created the AODV.tcl file. when I run AODV.tcl file only get the the nam visualization
    Please hep me.

    ReplyDelete
  2. I am not getting your AODV.tcl file

    ReplyDelete
  3. How could I pass those values from node to neighbor node along with the RREQ/RREP packet?

    ReplyDelete
  4. hello sir, i wanna modify MPR selection based on energy consumption. would you help where to do the modification in the OLSR. thank you. please mail me kasyekas2@gmail.com

    ReplyDelete
  5. Sir,

    While executing the tcl script for find the energy of the nodes. The runtime.dat is not getting created in the folder sir.

    I am using Ubuntu 18.04, So please do suggest me sir.

    ReplyDelete
  6. Sir, I like your videos all you have posted, on this video i didn't get the AODV.tcl file, where I get it? please send me with this address tibebulegesse23@gmail.com

    ReplyDelete
  7. Hello sir, thanks for your briefly explained tutorial it helps me to know about ns2 simulator as a whole. but when i download your source code of lecture 10 tspagent.cc and myown.tce i get the error.
    $ns myown.tcl
    The error says
    warning: no class variable Agent/PRADEEP::Temperature

    see tcl-object.tcl in tclcl for info about this warning.

    warning: no class variable Agent/PRADEEP::Magnetometer

    ns: puts"message from temperature sensor" : invalid command name "puts"message"
    while executing
    "puts"message from temperature sensor" "

    ReplyDelete
  8. warning: no class variable Agent/PRADEEP::Temperature

    see tcl-object.tcl in tclcl for info about this warning.

    warning: no class variable Agent/PRADEEP::Magnetometer

    ns: puts"message from temperature sensor" : invalid command name "puts"message"
    while executing
    "puts"message from temperature sensor" "

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#