Skip to main content

How to access ext2, ext3 and ext4 filesystems in windows 10



Dual boot with Windows and Linux leads to the access of files in other Operating Systems. Viewing a windows partition on a Linux OS is not a big task. One can simply mount the OS and can see the files of windows within Linux.

But accessing Linux EXT2, EXT3 and EXT4 files within Windows can be done only through an external software.

EXt2FSD is a software that does this job. you can download the software from this link
Once installed, its as easy as possible to “assign a drive letter ” to the partition.  Figure below shows that.

Ext2FSD
Ext2FSD

Ext2FSD
Ext2FSD

Its just a simple process to access the linux files within windows. This is really helpful for the machines with UEFI partition. When Linux Boot loader is deleted, this will help to retrieve the files.
Any other info, please comment below.

Comments

Popular posts from this blog

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installing ns-3.34 in Ubuntu 20.04

This post shows how to install ns 3.34 in Ubuntu 20.04 LTS Prerequisites: Fresh installation of Ubuntu Version 20.04 LTS  ns3.34 can be downloaded from here Follow the video link for complete step by step instructions on the installation.  This version fixes the compilation issues of vanet-routing-compare.cc (bug in ns3.33)  Issue the following commands after opening a terminal  $ sudo apt update $ sudo apt install g++ python3 python3-dev python-dev pkg-config sqlite3 python3-setuptools git qt5-default gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar openmpi-bin openmpi-common openmpi-doc libopenmpi-dev tcpdump wireshark libxml2 libxml2-dev Unzip or untar the ns-allinone-3.34.tar.bz2 in the home folder (in my case its /home/pradeepkumar) $ cd ns-allinone-3.34/ $ ./build.py --enable-examples --enable-tests  Once the installation is completed, you may get an output show

Installation of ns3 in Windows 10 and Windows 11 OS using WSL (Windows Subsystem for Linux)

This post shows how to install ns-3.33 in Windows 10 through WSL (Windows Subsystem for Linux) This posts works for Windows 11 also (I have tested it on a Windows 11 ISO and it works the Same way as mentioned in the following post.) This post will work for ns-3.3x version. Prerequisites : Install Windows Subsystem for Linux with GUI: Please refer the following video  System Information: OS used: Windows 10 and WSL (Ubuntu 20.04) GUI: XServer for Windows NS3 Version: ns-3.33 See the following complete video on how to install ns3 in Windows 10 Step 0 : Open XLaunch Step 1 :  Open WSL using PowerShell and open it as Administrator Command:/  wsl $ xfce4-session The GUI of Ubuntu Opens within Windows 10 OS. Step 2 : Download ns3 from nsnam.org website through Mozilla Firefox browser Step 3: Open a Terminal  $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev python3-pygraphviz cvs mercurial bzr git cmake p7zip-full python3-matplotlib python-tk python3-dev qt5-q