Skip to main content

OpenFlow in NS3

Installation of OpenFlow in NS3 is a simple task  and here is the method to do that.

NS3 version: ns-3.24.1 and ns-3.25

Assumption: You should have installed #ns3 already in your machine. 

#OpenFlow is a software helpful for Simulating Software Defined Networks (#SDN).

There are some packages needed to enable OpenFlow. Download these packages and try the installation later.

$] sudo apt-get install libboost-all-dev libxml2 libxml2-dev 

Go to the ~ns-allinone-3.24.1/ns-3.24.1 folder and give this command 

 $] hg clone http://code.nsnam.org/openflow
(if the above command does not work, the give this command)
$] sudo apt-get install mercurial

 $] cd openflow
$] ./waf configure
$] ./waf build 
(if the build failed in the above steps, please give your comments)

 $] cd ..
$] ./waf configure --enable-examples --enable-tests --with-openflow=path/to/openflow

 In my case 
$] ./waf configure --enable-examples --enable-tests --with-openflow=openflow

 After you run the above command, you should get the following screen. (See the selected white line). In the first image, it shows not enabled and the second image shows enabled
OpenFlow
OpenFlow

OpenFlow
OpenFlow

After enabling the openflow give this command 

 $] ./waf build 
After this command, ensure that openflow is built as shown below
OpenFlow
OpenFlow



T S Pradeep Kumar
Labels:

Comments

  1. UnknownAugust 8, 2019 at 11:36 AM

    Waf: Leaving directory `/home/ns3/ns3/ns-allinone-3.29/ns-3.29/build'
    Build failed
    -> task in 'openflow-switch' failed with exit status 1 (run with -v to display more information)

    ReplyDelete
  2. UnknownAugust 8, 2019 at 11:37 AM

    Waf: Leaving directory `/home/ns3/ns3/ns-allinone-3.29/ns-3.29/build'
    Build failed
    -> task in 'openflow-switch' failed with exit status 1 (run with -v to display more information)

    ReplyDelete
  3. UnknownMarch 15, 2020 at 1:22 PM

    Build failed
    -> task in 'ns3module_lte' failed with exit status 1 (run with -v to display more information)

    ReplyDelete
  4. for.August 30, 2020 at 8:58 PM

    it is not build

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide]

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide] Are you planning to install or try Ubuntu 24.04 LTS ? The easiest and most reliable method is to create a bootable USB drive using Rufus on a Windows system. This detailed guide will help you create a Ubuntu 24.04 USB bootloader using Rufus with easy-to-follow steps and screenshots (optional). Here is the complete video of the bootloader creation and OS installation in Windows 11. 🧰 Requirements A USB flash drive (minimum 8GB recommended) A Windows PC Ubuntu 24.04 LTS ISO file Rufus USB creation tool 🧾 Steps to Create a Ubuntu 24.04 Bootable USB Using Rufus ✅ Step 1: Download Ubuntu 24.04 ISO Visit the official Ubuntu website and download the Ubuntu 24.04 LTS ISO file . ✅ Step 2: Download and Run Rufus Head to Rufus official site and download the latest version. Open the executable file (no installation required). ✅ Step 3: Insert USB Drive Plug in your USB drive. Rufus ...
Post a Comment
Read more

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libc...
3 comments
Read more

NS2 (NS-2.35) Installation in Ubuntu 11.10

This post will help you in installing Network Simulator 2 version NS2.35 in Ubuntu 11.10 Instructions Install Ubuntu Download NS-2.35 ( http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download ) Unzip or untar it to any folder (recommended is /home/ loginname) using the following commands one by one sudo apt-get update sudo apt-get install build-essential autoconf automake libxmu-dev tar zxvf ns-allinone-2.35.tar.gz cd ns-allinone-2.35 ./install Once installed the PATH information will be provided to you. Copy the PATH and LD_LIBRARY_PATH Variable to .bashrc (see a dot in the beginning) Input the path information in .bashrc file like this export PATH=$PATH:<Place your paths here> export LD_LIBRARY_PATH=$LD_LIBRARY_PATH: <place the LD_LIBRARY_PATHS> here. Once done, save the file and close execute the command source .bashrc try ns or nam to see whether your installation succeeded.
77 comments
Read more