Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

BonnMotion - A mobile scenario Generator Tool

BonnMotion is a tool that generates scenario for ns2, ns3, qualnet, etc. This will comfortably work with Linux. And in windows, there could be some bugs.

Please refer the documentation here: http://sys.cs.uos.de/bonnmotion/doc/BonnMotion_Docu.pdf

To use this tool for ns2, here are the steps.
Step1 : Download the BonnMotion tool from this website
Step 2: Unzip it to home folder (/home/pradeepkumar in my case)
step 3: Here are the commands to install
$] unzip -d bonnmotion-2.1.3.zip
$] cd bonnmotion-2.1.3/
$] ./install 
The above command will install, if any packages are missing for dependencies, please install it.

$] Once installed, copy the bonnmotion-2.1.3/bin/bm file to /usr/bin/ for running it anywhere. if not go to bin folder using the command given below

$] cd bonnmotion-2.1.3/bin/

To run BonnMotion
$bonnmotion-2.1.3/bin] ./bm -hm 
(this will list all the models)

$bonnmotion-2.1.3/bin] ./bm -hm RandomWaypoint
Will display all the parameters for RandomWaypoint like number of nodes, x, y, random seed, etc.

Assuming RandomWaypoint is the model

$bonnmotion-2.1.3/bin] ./bm -f scenario RandomWaypoint -n 10 -x 500 -y 500
The above command will create a file called scenario with 10 number of nodes with x and y as 500x500)

$bonnmotion-2.1.3/bin]  ./bm NSFile -f scenario
This will create two files called scenario.ns_movements, scenario.ns_params


The above two files can be used inside tcl script for ns2 using the source command

source scenario.ns_params
source scenario.ns_movements



(NB: Please note that the above two files represents nodes like $node_(0), etc and $ns_ as simulator object, either you change these variables within your tcl file or edit the above two files.  Also scenario.ns_params file shows the stop script as set val(duration) 600.0, but most of the tcl scripts may have val(stop), so change it to val(duration) in all cases) 


The same will be applied to other simulators also, refer the documentation given in the beginning of the slide.

Some screenshots for you.:

Bonnmotion
Installing Bonnmotion

Bonnmotion
bm command with options

Bonnmotion
A Sample Tcl file using the script generated by BonnMotion

Download the sample files here: put all the files in a single folder and run the tcl file using
$] ns ex.tcl

Provide your comments below, if you need any queries.

Credits to:  http://sys.cs.uos.de/bonnmotion/index.shtml


 T S Pradeep Kumar

Comments

  1. how to plot x graph for given 10 nodes with NAM.

    ReplyDelete
  2. thank you sir.. it worked well

    But when I am trying to add nodes while decreasing mobility it is giving the bellow error

    "$node_(0) set X_ 310.97108157103526"
    (file "ex20.ns_movements" line 1)
    invoked from within
    "source.orig ex20.ns_movements"
    ("uplevel" body line 1)
    invoked from within
    "uplevel source.orig [list $fileName]"
    invoked from within
    "if [$instance_ is_http_url $fileName] {
    set buffer [$instance_ read_url $fileName]
    uplevel eval $buffer
    } else {
    uplevel source.orig [list $fileName]
    ..."
    (procedure "source" line 8)
    invoked from within
    "source ex20.ns_movements"
    (file "ex20.tcl" line 84)

    Please help me with this. Thank you.

    ReplyDelete
  3. please help with the error generated while I try to modify the code


    "$node_(0) set X_ 310.97108157103526"
    (file "ex20.ns_movements" line 1)
    invoked from within
    "source.orig ex20.ns_movements"
    ("uplevel" body line 1)
    invoked from within
    "uplevel source.orig [list $fileName]"
    invoked from within
    "if [$instance_ is_http_url $fileName] {
    set buffer [$instance_ read_url $fileName]
    uplevel eval $buffer
    } else {
    uplevel source.orig [list $fileName]
    ..."
    (procedure "source" line 8)
    invoked from within
    "source ex20.ns_movements"
    (file "ex20.tcl" line 84)

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#