Skip to main content

NS2 Visual trace analyzer

A Visual trace analyzer is been developed by Mr. Fernando and you can download freely from his website http://nsvisualtraceanalyzer.wordpress.com/ This software is been developed using
  • .NET C# 4.0
  • This software will run only in windows and not tested in Wine platform of Linux (May be will work)
This software accepts a tcl, trace files, scenario files and interprets the contents and displays results like throughput,data, etc.
Also there is a provision for graphing too.. Its a very great handy tool for NS2 (particularly beginners to researchers)..
Here are some of the screen shots of the software
Open a Tcl File and shows the second picture as shown in the next picture.
 In the following pic, the tcp packet flow is selected and a window pops out with various results.
Iin the following picture, the right side of the window is not used and the cross X indicates it is not used now, may be in future that area will be used.
And this picture tells you the throughput of a gives network.


Labels:

Comments

  1. AnonymousFebruary 22, 2013 at 9:15 PM

    Sir, i am a new comer in scripting field and i need a script to do some calculation on the below given file data ....... please help me to write a shell script file based on the below file... it look like this.......

    c1 c2 c3 c4 c5
    s 0.398589568 _1_ MAC 0 (request send)
    s 0.513566459 _4_ MAC 0
    s 0.552966970 _0_ MAC 0
    s 0.787311440 _3_ MAC 0
    s 0.877323712 _2_ MAC 0
    s 46.46441059 _1_ MAC 0 (re-request send)
    s 47.59068956 _0_ MAC 0
    s 47.90057161 _0_ MAC 0
    s 47.98677431 _0_ MAC 0
    s 48.96975450 _0_ MAC 0
    s 48.9869547 _1_ MAC 0 (re-request send)
    r 49.0457547 _0_ MAC 1 (received request)
    s 50.058781511 _0_ MAC 0
    s 56.459210991 _3_ MAC 0
    s 66.986774311 _1_ MAC 0 (acknowledge send)
    s 67.020641218 _2_ MAC 6
    r 67.09610788 _1_ MAC 0 (acknowledge receive )
    s 68.073182951 _0_ MAC 0

    i want to write a script to which will help me to extract
    A) the maximum and minimum value of c2 when c1=s, c3=_1_ and c5=0.
    B) the minimum value of c2 when c1=r, c3=_0_ and c5=1.

    i want to do the delay calculation between two nodes... description of formula...
    node say n1(in my table it is _1_) send a request and time isT1... node n2 (in my table it is _0_) receive a request at time T2 and reply with an acknowledgement at time T3. the node n1 receive the ack packet at T4 time.
    Tint= T3-T2........
    formula is ------- (T4-T1-Tint)/2
    i will be highly grateful if anyone kindly do this to me. Hoping for reply me very soon. have a good day. Thanks.

    ReplyDelete
  2. UnknownNovember 18, 2019 at 8:14 PM

    i have install ubuntu on virtual box. can i install ns2 trace visualizer on virtual box? if yes how? please guide me. thanks

    ReplyDelete

Post a Comment

Popular posts from this blog

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide]

How to Create Ubuntu 24.04 Bootable USB Using Rufus [Step-by-Step Guide] Are you planning to install or try Ubuntu 24.04 LTS ? The easiest and most reliable method is to create a bootable USB drive using Rufus on a Windows system. This detailed guide will help you create a Ubuntu 24.04 USB bootloader using Rufus with easy-to-follow steps and screenshots (optional). Here is the complete video of the bootloader creation and OS installation in Windows 11. 🧰 Requirements A USB flash drive (minimum 8GB recommended) A Windows PC Ubuntu 24.04 LTS ISO file Rufus USB creation tool 🧾 Steps to Create a Ubuntu 24.04 Bootable USB Using Rufus ✅ Step 1: Download Ubuntu 24.04 ISO Visit the official Ubuntu website and download the Ubuntu 24.04 LTS ISO file . ✅ Step 2: Download and Run Rufus Head to Rufus official site and download the latest version. Open the executable file (no installation required). ✅ Step 3: Insert USB Drive Plug in your USB drive. Rufus ...
Post a Comment
Read more

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libc...
3 comments
Read more

NS2 (NS-2.35) Installation in Ubuntu 11.10

This post will help you in installing Network Simulator 2 version NS2.35 in Ubuntu 11.10 Instructions Install Ubuntu Download NS-2.35 ( http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download ) Unzip or untar it to any folder (recommended is /home/ loginname) using the following commands one by one sudo apt-get update sudo apt-get install build-essential autoconf automake libxmu-dev tar zxvf ns-allinone-2.35.tar.gz cd ns-allinone-2.35 ./install Once installed the PATH information will be provided to you. Copy the PATH and LD_LIBRARY_PATH Variable to .bashrc (see a dot in the beginning) Input the path information in .bashrc file like this export PATH=$PATH:<Place your paths here> export LD_LIBRARY_PATH=$LD_LIBRARY_PATH: <place the LD_LIBRARY_PATHS> here. Once done, save the file and close execute the command source .bashrc try ns or nam to see whether your installation succeeded.
77 comments
Read more