Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

NS2.35 installation in Fedora 15 and Ubuntu 11.10

NS 2.35 can be installed successfully in Fedora 15 and Ubuntu 11.10 using the following steps

In Fedora 15
  1. Download ns-allinone-2.35 from the NS2 website. The recent version was RC8
  2. select the folder /home/username, untar the file using the command "tar zxvf ns-allinone-xxx.tar.gz" (without quotes).
  3. Go to the folder /home/username/ns-allinone-2.35/ using the command cd  /home/username/ns-allinone-2.35 /  and execute the command ./install (dot /install)
  4. You may encounter an error in the file mac_80211Ext.h and correct the error given in the following line
  5. Open the file /home/username/ns-allinone-2.35/ns-2.35/mac/mac_80211Ext.h and include the following line in the header file area
    1. #include <cstddef>
  6. Go to step3 and type ./install 
  7. Once installation completed, set the path information in .bash_profile (dot bash_profile)
    1. you need to set two path variables PATH and LD_LIBRARY_PATH
    2. please see this link for setting the path http://pradeepkumar.org/54/installation-instructions-for-network
For Ubuntu 11.10
  1. Please see step1 and step 2 in Fedora 15
  2. Ubuntu needed some software to be installed before installation of NS2. execute the following command to install
    1. sudo apt-get install build-essential autoconf automake libxmu-dev gcc-4.4 g++-4.4 
  3. You need to connect your machine to internet.
  4. Once all the packages are downloaded, go to step 3,4,5 and 6 from Fedora 15 installation.
  5. Once installation completed, set the path information in .bashrc (dot bashrc)
    1. you need to set two path variables PATH and LD_LIBRARY_PATH
    2. please see this link for setting the path http://pradeepkumar.org/54/installation-instructions-for-network
In both the above Operating System, you may come across an error while running ns and nam in the terminal window
The error may be ****Buffer Over flow - ns termination ***
To overcome this error, edit the following file
/home/username/ns-allinone-2.35/tcl8.5.8/unix/Makefile.in
Replace the following line
CC = @CC@
with
CC=gcc-4.4
and reinstall the steps (step3 in fedora 15 and step 4 in Ubuntu) as mentioned above.
Logout and login back

That's it.

Comments

  1. hi i've got the version ns-allinone-2.34 and tried to install using "cd /home/username/ns-allinone-2.34 /" followed by "sudo ./install" on which i was asked to give the root password. However i got the message "sudo ./install: command not found". What should i do to get it installed?

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#