Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

checking system version (for dynamic loading)...

If you encounter the following error,  checking system version (for dynamic loading)... ./configure: 1: Syntax error: Unterminated quoted string
then do the following,

Open the following files under ns-allinone-2.xx/

tcl: file tcl8.x.x/unix/tcl.m4
tk: file tk8.x.x/unix/tcl.m4
otcl: file otcl-1.x/configure.in

In all the above files, you can find the following line
system=MP-RAS-`awk ' { print $3 } '/etc/.relid'`

and change the above line to (just remove the last but one single quote, remember that ‘ is different from ` you need to remove only ‘ and not `)

system=MP-RAS-`awk ' { print $3 } '/etc/.relid`

Comments

  1. hi
    i installed ns2.31
    ns2 succesfully installed it gives but
    gives errors for nam like
    nam:
    [code omitted because of length]
    : no event type or button # or keysym
    while executing
    "bind Listbox {
    %W yview scroll [expr {- (%D / 120) * 4}] units
    }"
    invoked from within
    "if {[tk windowingsystem] eq "classic" || [tk windowingsystem] eq "aqua"} {
    bind Listbox {
    %W yview scroll [expr {- (%D)}] units
    }
    bind Li..."
    child process exited abnormally
    plz tell me the solution for this

    ReplyDelete
  2. hi
    i installed ns2.31 in ubuntu 10.04lts

    ns2 succesfully installed it gives but
    gives errors for nam like
    nam:
    [code omitted because of length]
    : no event type or button # or keysym
    while executing
    "bind Listbox {
    %W yview scroll [expr {- (%D / 120) * 4}] units
    }"
    invoked from within
    "if {[tk windowingsystem] eq "classic" || [tk windowingsystem] eq "aqua"} {
    bind Listbox {
    %W yview scroll [expr {- (%D)}] units
    }
    bind Li..."
    child process exited abnormally
    plz tell me the solution for this

    ReplyDelete
  3. i copied 802.16 protocols into the common folder and mac folder and modified the makefile
    then after that i tried to reconfigure using the make clean make install but it gives the following errors can u help me plz



    sabareesh@sabareesh-laptop:~/ns-allinone-2.35-RC3/ns-2.35$ make clean
    Makefile:251: *** commands commence before first target. Stop.

    ReplyDelete
  4. when i ./configure it gives followng error

    configure: error: Installation of tcl seems incomplete or can't be found automatically.
    Please correct the problem by telling configure where tcl is
    using the argument --with-tcl=/path/to/package
    (perhaps after installing it),
    or the package is not required, disable it with --with-tcl=no.

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#