Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

Tracegraph installation in Ubuntu 13.10 (64 bit)

Installing Tracegraph in Linux is always a challenge and that too in a 64 BIT operating System. This post will help the readers in installing the tracegraph comfortably in Ubuntu 13.10 (64 bit OS).

You may refer the older post too: http://www.nsnam.com/2013/02/how-to-install-tracegraph-in-64-bit.html

Ubuntu 13.10 is revamped with great features and also there are some limitations while installing 32 bit softwares in 64 bit OS.

So here are the steps in Installing Tracegraph in Ubuntu 13.10

  • Download the Tracegraph.tar.gz file and copy it to the /home/username folder
  • Enter the following commands one by one 
  • Untar it by entering the command, "tar xvzf tracegraph.tar.gz"
  • cd tracegraph202
  • ./trgraph  (if this command gives you ./trgraph command not found, the follow the next step)
  • sudo apt-get install  lib32z1 lib32ncurses5 lib32bz2-1.0 libxi6 libxtst6 libxrender1 libxtst6:i386 libXp6:i386 libXt6:i386
  • The above command will fetch various libraries from the internet sources and downloaded and then try ./trgraph (you can see three windows popping out as indicated in the figure)
Tracegraph
Tracegraph on Ubuntu 13.10

Don't forget to set the LD_LIBRARY_PATH for the shared object libraries as given below
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/username/tracegraph202/bin/glnx86/

If the path for NS2 is already set, the append this line to the existing LD_LIBRARY_PATH variable as given below
export LD_LIBRARY_PATH=/first/path:/second/path:/home/username/tracegraph202/bin/glnx86/



Comments

  1. hello sir sir dropbox link is expired please upload updated one. thank you

    ReplyDelete
  2. hello sir I have a problem please help

    ./trgraph: error while loading shared libraries: libmwsgl.so: cannot open shared object file: No such file or directory

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#