Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

C Program 2 – Electricity Bill calculation

This program is to display the electricity bill calculation based on the number of units consumed every month

Input : the number of units – variable name – unit

Output – Amount of rupee – variable name – amount

Logic:

Units Rupees
1-50 units 0.75/unit
51-100 0.85/unit
101-200 1.50/unit
201-300 2.20/unit
>300 3.00/unit

In all the cases, there will be service charge of Rs.20 will be collected.

#include <stdio.h>
#include <conio.h>
int main()
{
    float amount=0,units;;
    printf("Enter the number of units");
    scanf("%f", &units);
    if(units <=50)
    {
     amount = units * 0.75;       
    }   
    else if(units >50 && units <=100)
    {
         amount=0.75 * 50 + 0.85*(units-50);
    }
    else if(units >100 && units <200)
    {
         amount=(0.75*50) + (0.85*50 )+ (1.5 *(units-100));
    }
    else if(units >200 && units <300)
    {
         amount=(0.75*50) + (0.85*50 )+ (1.5 *100) + (2.20 *(units-200));
    }
    else
    {
         amount=(0.75*50) + (0.85*50 )+ (1.5 *100) + (2.20 * 100) +(3.0*(units-300));
    }
    amount=amount+(0.2*amount);
    printf("The total electricity bill is %f", amount);
    getch();
    return 0;
}

Comments

  1. please write few line, it will be easy to understand

    ReplyDelete
  2. too short...please extend it

    ReplyDelete
  3. i need c code for spot billing machine

    ReplyDelete
  4. helps very good...!!!!

    ReplyDelete
  5. if th units used is greater than 300 an intrest of 15% wil b given then hw 2 modify ys pgm

    ReplyDelete
  6. it gies good ideas"THANK U".good

    ReplyDelete
  7. dear sir ,
    i wants write a program in c language to print an item (or product) bill with use of item_name, item_price, quantity_of_items,sell_item and total_of_amount.
    so i need a help to make this type of program in c language.

    thanks.....!

    ReplyDelete
  8. Helps very much yaar...!And could understand it very clearly.Thanks..!

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#