Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

Installing Windows 7 from USB

Are you a person recently purchased a netbook which is not having a DVD ROM, No problem, you can install any OS using a pendrive or USB’s.

Here is the steps.

Requirements

1. A 4GB pen drive (since the size of Windows 7 is 2.34GB)

2. Windows 7 installation files or a iso image of Windows 7 OS

3. Administrative privileges in the OS

Step 1 : Take the backup of all the data in your usb drive plug into the Machine.

Step 2: Go to device manager (Control panel –> device manager –> select disk –> select your usb drive ) and then right click –> properties –> go to policies –> Select Better performance). This step is needed for faster installation of windows 7 (You can wonder, windows 7 installed within 15 minutes with just 1GB RAM) See the following picture

one

 

two

Step 3:   open the command prompt with administrative rights (Accessories –> right click Command prompt – and select run as administrator)

Step 4: type DISKPART  (you will get a prompt as DISKPART)

Step 5: type LIST DISK (it will list all the disks), please remember the disk number of your pen drive (see the following picture)

three

So, mine is disk 1

Step 6: Execute the following commands one by one,

SELECT DISK 1

CLEAN

CREATE PARTITION PRIMARY

SELECT PARTITION 1

ACTIVE

FORMAT FS=NTFS   (since windows 7 permits only NTFS, the USBs also to be formatted as NTFS, and this process will take some time)

ASSIGN

EXIT

Step 7: Now insert the windows 7 DVD drive or if you have iso image, using winrar extract it to a folder

Step 8:  go to the concerned folder in the command prompt (assume installation files of windows 7 as E:/win07)

execute the command in command prompt

E:

CD win07/BOOT

BOOTSECT.EXE /NT60 G: (assigning the bootmanager to the USB. G is the drive letter for my USB)

Step 9: After getting the successful message, copy the contents of your Windows 7 installation files to your USB Drive. Thats it.

Enable Booting from  USB option in your BIOS and lets see the installation will complete within 15 minutes.!!!!

 

Thanks to http://www.intowindows.com/how-to-install-windows-7vista-from-usb-drive-detailed-100-working-guide/

Comments

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#