Skip to main content

PyTorch Code for Simple Neural Networks for MNIST Dataset

AODV simulation in NS2 (Part 1) - NS2 Tutorial # 11

Lecture 11 - AODV - Part 1
Todays topic on AODV protocol

AODV - Adhoc Ondemand Distance Vector
the location of the source code for Aodv is in the folder

~ns-2.35/aodv/

My suggestion is
Always try to understand the header file first.. later you can move on to source file (.cc files)
I will go through aodv.h file first and then aodv.cc file next....
let me explain....

I should know where my work is residing, for example in AODV

should I work on


  • Routing Table
  • Energy Management
  • Quality oif Service
  • Link Failure
  • Logs or tracing
  • Neighbour management
  • Attacks (Black hole, gray hole, etc...)
  • Security

so prefer to stay at the header files first...
Now the action begins.
how do i modify the AODV protocol as per my small piece of algorithm...
I would like to print the nodes that are forwarding the packets.
Two information will be recorded in a text file separately..

Name of the file: aodv_output.dat data recorded will be: forwarded packet, node index (node number).

For this, please open the aodv.h and aodv.cc file.

Step 1:
add a variable called as pkt_count as an integer in protected scope inside the aodv.h file.

int pkt_count;
Step 2:

Initialize pkt_count with a value 0 in the aodv.cc file (preferably in the constructor)

pkt_count=0;

Step 3:

Since I am going to get the packet counts in a file, i need to create a file pointer. But first let me get the data in the terminal itself. later i will create it in the file.

Also, only during the forwarding of packets, i am going to get the count, so my code will be running inside the forward() function.

Add the following line to the forward() function of aodv.cc

printf("I am packet no %d and from node number %d\n",pkt_count++,index);


Step 4:
Now recompile ns2 using the command make

$] cd ns-allinone-2.35/ns-2.35/

$] make


Once, there are no errors, your code is compiled successfully....

Then, run any wireless tcl script that has the routing protocol as AODV.
I am running AODV.tcl file that was generated in LEcture number 9.

to run that just
$] ns AODV.tcl

$] nam AODV.nam

I need to get this output in a file called as aodv_output.dat
How to do that... Again the same step open, aodv.cc and aodv.h

Declare a file pointer inside the aodv.h file

FILE *fp;

Initialize this file pointer in aodv.cc constructor

fp = fopen ("aodv_output.dat","w");

include the following line in the forward() function of aodv.cc


fprintf(fp,"I am packet no %d and from node number %d\n",pkt_count++,index);

and run the AODV.tcl file and check for a file called aodv_output.dat is created in the same folder where the AODV.tcl is residing.


Thank you for watching..
To download the codes, visit https://www.nsnam.com

and share and subscribe to my youtube channel
Youtube.com/tspradeepkumar
Stay Tuned for more lectures...

T S Pradeep Kumar

Comments

  1. Hello ,
    I' do not see the printf in the terminal, can you help me please

    ReplyDelete
  2. Sir, I can not find the codes. Please help me out with a link.

    ReplyDelete
    Replies
    1. i also cannot find codes here. Please help me out to find codes

      Delete
    2. there is no source code for AODV simulation ns2

      Delete
  3. how can i adding function into AODV.cc file

    ReplyDelete
  4. sorry to not answer your question but i am comming with another problem which is: how to implement the tesla protocol in ad hoc network in ns2.

    ReplyDelete
  5. Why the whole procedure so error while each step i take perfectly.

    ReplyDelete
  6. Sir fprintf text file not create while its recompile successfully. Any solution??

    ReplyDelete
  7. i didnt find the code source aodv.tcl

    ReplyDelete

Post a Comment

Popular posts from this blog

Installing ns3 in Ubuntu 22.04 | Complete Instructions

In this post, we are going to see how to install ns-3.36.1 in Ubuntu 22.04. You can follow the video for complete details Tools used in this simulation: NS3 version ns-3.36.1  OS Used: Ubuntu 22.04 LTS Installation of NS3 (ns-3.36.1) There are some changes in the ns3 installation procedure and the dependencies. So open a terminal and issue the following commands Step 1:  Prerequisites $ sudo apt update In the following packages, all the required dependencies are taken care and you can install all these packages for the complete use of ns3. $ sudo apt install g++ python3 python3-dev pkg-config sqlite3 cmake python3-setuptools git qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools gir1.2-goocanvas-2.0 python3-gi python3-gi-cairo python3-pygraphviz gir1.2-gtk-3.0 ipython3 openmpi-bin openmpi-common openmpi-doc libopenmpi-dev autoconf cvs bzr unrar gsl-bin libgsl-dev libgslcblas0 wireshark tcpdump sqlite sqlite3 libsqlite3-dev  libxml2 libxml2-dev libc6-dev libc6-dev-i386 libclang-dev llvm-

Installation of NS2 (ns-2.35) in Ubuntu 20.04

Installation of NS2 (ns-2.35) in Ubuntu 20.04 LTS Step 1: Install the basic libraries like      $] sudo apt install build-essential autoconf automake libxmu-dev Step 2: install gcc-4.8 and g++-4.8 open the file using sudo mode $] sudo nano /etc/apt/sources.list Include the following line deb http://in.archive.ubuntu.com/ubuntu bionic main universe $] sudo apt update $] sudo apt install gcc-4.8 g++-4.8 Step 3:  Unzip the ns2 packages to home folder $] tar zxvf ns-allinone-2.35.tar.gz $] cd ns-allinone-2.35/ns-2.35 Modify the following make files. ~ns-2.35/Makefile.in Change @CC@ to gcc-4.8 change @CXX@ to g++-4.8 ~nam-1.15/Makefile.in ~xgraph-12.2/Makefile.in ~otcl-1.14/Makefile.in Change in all places  @CC@ to gcc-4.8 @CPP@ or @CXX@ to g++-4.8 open the file: ~ns-2.35/linkstate/ls.h Change at the Line no 137  void eraseAll() { erase(baseMap::begin(), baseMap::end()); } to This void eraseAll() { this->erase(baseMap::begin(), baseMap::end()); } All changes made Step 4: Open a new termi

Installation of NS2 in Ubuntu 22.04 | NS2 Tutorial 2

NS-2.35 installation in Ubuntu 22.04 This post shows how to install ns-2.35 in Ubuntu 22.04 Operating System Since ns-2.35 is too old, it needs the following packages gcc-4.8 g++-4.8 gawk and some more libraries Follow the video for more instructions So, here are the steps to install this software: To download and extract the ns2 software Download the software from the following link http://sourceforge.net/projects/nsnam/files/allinone/ns-allinone-2.35/ns-allinone-2.35.tar.gz/download Extract it to home folder and in my case its /home/pradeepkumar (I recommend to install it under your home folder) $ tar zxvf ns-allinone-2.35.tar.gz or Right click over the file and click extract here and select the home folder. $ sudo apt update $ sudo apt install build-essential autoconf automake libxmu-dev gawk To install gcc-4.8 and g++-4.8 $ sudo gedit /etc/apt/sources.list make an entry in the above file deb http://in.archive.ubuntu.com/ubuntu/ bionic main universe $ sudo apt update Since, it&#